PRO CF-634

A very compact carbon fiber tripod, the Slik PRO CF-634 is for those who don’t need a full sized tripod but want something to hold there camera still in a wide variety of situations.   The SLIK PRO CF-634 is extremely lightweight. It has four short leg sections extending to nearly 1.6m and folding down to 45cm for carrying and storage. Most noteworthy, the SLIK PRO CF-634 weighs only 930g, but supports loads up to 3kgs., making it a great choice for travel.  Use it in situations where a full-sized tripod would not be needed or convenient to carry.

All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.

The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup. 

A very compact carbon fiber tripod, the Slik PRO CF-634 is for those who don’t need a full sized tripod but want something to hold there camera still in a wide variety of situations.   The SLIK PRO CF-634 is extremely lightweight. It has four short leg sections extending to nearly 1.6m and folding down to 45cm for carrying and storage. Most noteworthy, the SLIK PRO CF-634 weighs only 930g, but supports loads up to 3kgs., making it a great choice for travel.  Use it in situations where a full-sized tripod would not be needed or convenient to carry.

All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.  The legs also feature A.R.S (Anti-Rotational System) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground.

The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

Head mounting screw

Corresponding to both U1/4 and U3/8 head mounting screws.

3-steps leg angle adjustment

Leg angle adjustable from a high position to a low position.

A.R.S (Anti-Rotation System)

The A.R.S. systems prevent the leg tubes from rotating inside each other making it much easier to lock and release all the twist-release locks securely.

Leg lock system (crown-type) (PAT.)

Twist lock system with double nut ring crown type (PAT.).

The hook at the bottom of the center column

Spring loaded accessory hook capable of suspending a weight.

General Info

Folded Length: 475mm
Maximum Operating Height: 1,590mm
Minimum Operating Height: 105mm
Maximum Center Column Ext.: 280mm
Weight: 930g
Head Portion Weight: -
Leg Portion Weight: 930g
Leg Lock Type: Twist Lock
Leg Tip: Rubber
How To Mount Camera: -
Number of Leg Sections: 4
Diameter of the first upper leg: 22mm
Type of Center Column Elevation: Center column type
Panhead: -
Type of Bubble Level: -
Special Features: Multi-position leg